STAERK MS is a adhesive and sealant suitable for many applications. Adheres to most common building substrates. Fully paintable. Available in cartridge and sausage in white, grey and black.
Properties
U/V Resistant – Paintable – Indoor / Outdoor – 20y. Guarantee
Recommended Use
- Bonding interior fittings and assembly work
- For a wide variety of substrates including timber, glass, metals and plastics
- Sealing tilt slabs & sealing air seals
Suitable for
- METAL, ALUMINIUM, STAINLESS STEEL
- WOOD, PVC, MOST PLASTICS
- BRICK, CONCRETE, MORTAR
- STONE, MARBLE , GRANITE
- PORCELAIN, CERAMIC, GLASS
Indoor / Outdoor
MS technology sealant has the best performance in all applications (inside /outside). Designed especially for demanding tasks
Weatherproof
With excellent UV and water resistance, superior elasticity & adhesion strength we made the toughest weatherproof product on the market.
Paintable
The sealant can be painted with traditional water/ oil-based paints, which is a rare tool for extra waterproofing of joins when painting.
20 y. Guarantee
Against cracking, pealing or crumbling under proper usage. We give the one of the longest and comprehensive guarantees in the industry.
Preparation
The base material need to be free of dust and grease or loose material. If needed clean up with a turpentine wet rag or cloth and let it dry. Complete adhesion test before use and make sure good compatibility and viscosity of the sealant with base materials.
Application
Cut off the top of the cartridge, position the threaded adaptor to the cartridge. Cut the threaded adaptor at an angle corresponding to the joint width. Place the cartridge into the gun and inject the joint with the sealant. Apply sufficient pressure to the sealant to ensure good penetration and adhesion to the joint sides. The applied sealant should be smoothed immediately with a wet spatula or jointer to clean off excess sealant. Staerk MS Sealant is not suitable for bonding polyethylene, polypropylene, Teflon, silicon or polystyrene based materials.
Cleaning
Clean while uncured with a turpentine cloth. After hardening removes the silicone sealant mechanically or with a silicone remover.
Health and Safety
- Non Toxicity when cured
- If medical advise is needed have product container and label at hand
- Read label before use
- Gloves and goggles must be worn during application
- If skin contact occurs remove the sealant with cloth and wash skin thoroughly with water and detergent for a minimum of 15mins
- Avoid eye contact before curing. If this occurs rinse opened eye for several minutes under running water, then consult a doctor.
- Ensure proper ventilation at workplace or curing area.
- Keep away from children.
Storage
- Protect from freezing, store in a cool dry place at room temperature.
- Product must be used within 24 months of purchase.
